Go to the first, previous, next, last section, table of contents.

Reading and Printing Lisp Objects

Printing and reading are the operations of converting Lisp objects to textual form and vice versa. They use the printed representations and read syntax described in section Lisp Data Types.

This chapter describes the Lisp functions for reading and printing. It also describes streams, which specify where to get the text (if reading) or where to put it (if printing).

Introduction to Reading and Printing

Reading a Lisp object means parsing a Lisp expression in textual form and producing a corresponding Lisp object. This is how Lisp programs get into Lisp from files of Lisp code. We call the text the read syntax of the object. For example, the text `(a . 5)' is the read syntax for a cons cell whose CAR is a and whose CDR is the number 5.

Printing a Lisp object means producing text that represents that object--converting the object to its printed representation. Printing the cons cell described above produces the text `(a . 5)'.

Reading and printing are more or less inverse operations: printing the object that results from reading a given piece of text often produces the same text, and reading the text that results from printing an object usually produces a similar-looking object. For example, printing the symbol foo produces the text `foo', and reading that text returns the symbol foo. Printing a list whose elements are a and b produces the text `(a b)', and reading that text produces a list (but not the same list) with elements a and b.

However, these two operations are not precisely inverses. There are two kinds of exceptions:

Input Streams

Most of the Lisp functions for reading text take an input stream as an argument. The input stream specifies where or how to get the characters of the text to be read. Here are the possible types of input stream:

buffer
The input characters are read from buffer, starting with the character directly after point. Point advances as characters are read.
marker
The input characters are read from the buffer that marker is in, starting with the character directly after the marker. The marker position advances as characters are read. The value of point in the buffer has no effect when the stream is a marker.
string
The input characters are taken from string, starting at the first character in the string and using as many characters as required.
function
The input characters are generated by function, one character per call. Normally function is called with no arguments, and should return a character. Occasionally function is called with one argument (always a character). When that happens, function should save the argument and arrange to return it on the next call. This is called unreading the character; it happens when the Lisp reader reads one character too many and wants to "put it back where it came from".
t
t used as a stream means that the input is read from the minibuffer. In fact, the minibuffer is invoked once and the text given by the user is made into a string that is then used as the input stream.
nil
nil supplied as an input stream means to use the value of standard-input instead; that value is the default input stream, and must be a non-nil input stream.
symbol
A symbol as input stream is equivalent to the symbol's function definition (if any).

Here is an example of reading from a stream that is a buffer, showing where point is located before and after:

---------- Buffer: foo ----------
This-!- is the contents of foo.
---------- Buffer: foo ----------

(read (get-buffer "foo"))
     => is
(read (get-buffer "foo"))
     => the

---------- Buffer: foo ----------
This is the-!- contents of foo.
---------- Buffer: foo ----------

Note that the first read skips a space. Reading skips any amount of whitespace preceding the significant text.

In Emacs 18, reading a symbol discarded the delimiter terminating the symbol. Thus, point would end up at the beginning of `contents' rather than after `the'. The Emacs 19 behavior is superior because it correctly handles input such as `bar(foo)', where the delimiter that ends one object is needed as the beginning of another object.

Here is an example of reading from a stream that is a marker, initially positioned at the beginning of the buffer shown. The value read is the symbol This.


---------- Buffer: foo ----------
This is the contents of foo.
---------- Buffer: foo ----------

(setq m (set-marker (make-marker) 1 (get-buffer "foo")))
     => #<marker at 1 in foo>
(read m)
     => This
m
     => #<marker at 5 in foo>   ;; Before the first space.

Here we read from the contents of a string:

(read "(When in) the course")
     => (When in)

The following example reads from the minibuffer. The prompt is: `Lisp expression: '. (That is always the prompt used when you read from the stream t.) The user's input is shown following the prompt.

(read t)
     => 23
---------- Buffer: Minibuffer ----------
Lisp expression: 23 RET
---------- Buffer: Minibuffer ----------

Finally, here is an example of a stream that is a function, named useless-stream. Before we use the stream, we initialize the variable useless-list to a list of characters. Then each call to the function useless-stream obtains the next character in the list or unreads a character by adding it to the front of the list.

(setq useless-list (append "XY()" nil))
     => (88 89 40 41)

(defun useless-stream (&optional unread)
  (if unread
      (setq useless-list (cons unread useless-list))
    (prog1 (car useless-list)
           (setq useless-list (cdr useless-list)))))
     => useless-stream

Now we read using the stream thus constructed:

(read 'useless-stream)
     => XY

useless-list
     => (40 41)

Note that the open and close parentheses remains in the list. The Lisp reader encountered the open parenthesis, decided that it ended the input, and unread it. Another attempt to read from the stream at this point would read `()' and return nil.

Function: get-file-char
This function is used internally as an input stream to read from the input file opened by the function load. Don't use this function yourself.

Input Functions

This section describes the Lisp functions and variables that pertain to reading.

In the functions below, stream stands for an input stream (see the previous section). If stream is nil or omitted, it defaults to the value of standard-input.

An end-of-file error is signaled if reading encounters an unterminated list, vector, or string.

Function: read &optional stream
This function reads one textual Lisp expression from stream, returning it as a Lisp object. This is the basic Lisp input function.

Function: read-from-string string &optional start end
This function reads the first textual Lisp expression from the text in string. It returns a cons cell whose CAR is that expression, and whose CDR is an integer giving the position of the next remaining character in the string (i.e., the first one not read).

If start is supplied, then reading begins at index start in the string (where the first character is at index 0). If end is also supplied, then reading stops just before that index, as if the rest of the string were not there.

For example:

(read-from-string "(setq x 55) (setq y 5)")
     => ((setq x 55) . 11)
(read-from-string "\"A short string\"")
     => ("A short string" . 16)

;; Read starting at the first character.
(read-from-string "(list 112)" 0)
     => ((list 112) . 10)
;; Read starting at the second character.
(read-from-string "(list 112)" 1)
     => (list . 5)
;; Read starting at the seventh character,
;;   and stopping at the ninth.
(read-from-string "(list 112)" 6 8)
     => (11 . 8)

Variable: standard-input
This variable holds the default input stream--the stream that read uses when the stream argument is nil.

Output Streams

An output stream specifies what to do with the characters produced by printing. Most print functions accept an output stream as an optional argument. Here are the possible types of output stream:

buffer
The output characters are inserted into buffer at point. Point advances as characters are inserted.
marker
The output characters are inserted into the buffer that marker points into, at the marker position. The marker position advances as characters are inserted. The value of point in the buffer has no effect on printing when the stream is a marker.
function
The output characters are passed to function, which is responsible for storing them away. It is called with a single character as argument, as many times as there are characters to be output, and is free to do anything at all with the characters it receives.
t
The output characters are displayed in the echo area.
nil
nil specified as an output stream means to the value of standard-output instead; that value is the default output stream, and must be a non-nil output stream.
symbol
A symbol as output stream is equivalent to the symbol's function definition (if any).

Many of the valid output streams are also valid as input streams. The difference between input and output streams is therefore mostly one of how you use a Lisp object, not a distinction of types of object.

Here is an example of a buffer used as an output stream. Point is initially located as shown immediately before the `h' in `the'. At the end, point is located directly before that same `h'.

---------- Buffer: foo ----------
This is t-!-he contents of foo.
---------- Buffer: foo ----------

(print "This is the output" (get-buffer "foo"))
     => "This is the output"

---------- Buffer: foo ----------
This is t
"This is the output"
-!-he contents of foo.
---------- Buffer: foo ----------

Now we show a use of a marker as an output stream. Initially, the marker is in buffer foo, between the `t' and the `h' in the word `the'. At the end, the marker has advanced over the inserted text so that it remains positioned before the same `h'. Note that the location of point, shown in the usual fashion, has no effect.

---------- Buffer: foo ----------
"This is the -!-output"
---------- Buffer: foo ----------

m
     => #<marker at 11 in foo>

(print "More output for foo." m)
     => "More output for foo."

---------- Buffer: foo ----------
"This is t
"More output for foo."
he -!-output"
---------- Buffer: foo ----------

m
     => #<marker at 35 in foo>

The following example shows output to the echo area:

(print "Echo Area output" t)
     => "Echo Area output"
---------- Echo Area ----------
"Echo Area output"
---------- Echo Area ----------

Finally, we show the use of a function as an output stream. The function eat-output takes each character that it is given and conses it onto the front of the list last-output (see section Building Cons Cells and Lists). At the end, the list contains all the characters output, but in reverse order.

(setq last-output nil)
     => nil

(defun eat-output (c)
  (setq last-output (cons c last-output)))
     => eat-output

(print "This is the output" 'eat-output)
     => "This is the output"

last-output
     => (10 34 116 117 112 116 117 111 32 101 104 
    116 32 115 105 32 115 105 104 84 34 10)

Now we can put the output in the proper order by reversing the list:

(concat (nreverse last-output))
     => "
\"This is the output\"
"

Calling concat converts the list to a string so you can see its contents more clearly.

Output Functions

This section describes the Lisp functions for printing Lisp objects.

Some of the Emacs printing functions add quoting characters to the output when necessary so that it can be read properly. The quoting characters used are `"' and `\'; they distinguish strings from symbols, and prevent punctuation characters in strings and symbols from being taken as delimiters when reading. See section Printed Representation and Read Syntax, for full details. You specify quoting or no quoting by the choice of printing function.

If the text is to be read back into Lisp, then it is best to print with quoting characters to avoid ambiguity. Likewise, if the purpose is to describe a Lisp object clearly for a Lisp programmer. However, if the purpose of the output is to look nice for humans, then it is better to print without quoting.

Printing a self-referent Lisp object requires an infinite amount of text. In certain cases, trying to produce this text leads to a stack overflow. Emacs detects such recursion and prints `#level' instead of recursively printing an object already being printed. For example, here `#0' indicates a recursive reference to the object at level 0 of the current print operation:

(setq foo (list nil))
     => (nil)
(setcar foo foo)
     => (#0)

In the functions below, stream stands for an output stream. (See the previous section for a description of output streams.) If stream is nil or omitted, it defaults to the value of standard-output.

Function: print object &optional stream
The print function is a convenient way of printing. It outputs the printed representation of object to stream, printing in addition one newline before object and another after it. Quoting characters are used. print returns object. For example:

(progn (print 'The\ cat\ in)
       (print "the hat")
       (print " came back"))
     -| 
     -| The\ cat\ in
     -| 
     -| "the hat"
     -| 
     -| " came back"
     -| 
     => " came back"

Function: prin1 object &optional stream
This function outputs the printed representation of object to stream. It does not print newlines to separate output as print does, but it does use quoting characters just like print. It returns object.

(progn (prin1 'The\ cat\ in) 
       (prin1 "the hat") 
       (prin1 " came back"))
     -| The\ cat\ in"the hat"" came back"
     => " came back"

Function: princ object &optional stream
This function outputs the printed representation of object to stream. It returns object.

This function is intended to produce output that is readable by people, not by read, so it doesn't insert quoting characters and doesn't put double-quotes around the contents of strings. It does not add any spacing between calls.

(progn
  (princ 'The\ cat)
  (princ " in the \"hat\""))
     -| The cat in the "hat"
     => " in the \"hat\""

Function: terpri &optional stream
This function outputs a newline to stream. The name stands for "terminate print".

Function: write-char character &optional stream
This function outputs character to stream. It returns character.

Function: prin1-to-string object &optional noescape
This function returns a string containing the text that prin1 would have printed for the same argument.

(prin1-to-string 'foo)
     => "foo"
(prin1-to-string (mark-marker))
     => "#<marker at 2773 in strings.texi>"

If noescape is non-nil, that inhibits use of quoting characters in the output. (This argument is supported in Emacs versions 19 and later.)

(prin1-to-string "foo")
     => "\"foo\""
(prin1-to-string "foo" t)
     => "foo"

See format, in section Conversion of Characters and Strings, for other ways to obtain the printed representation of a Lisp object as a string.

Variables Affecting Output

Variable: standard-output
The value of this variable is the default output stream--the stream that print functions use when the stream argument is nil.

Variable: print-escape-newlines
If this variable is non-nil, then newline characters in strings are printed as `\n' and formfeeds are printed as `\f'. Normally these characters are printed as actual newlines and formfeeds.

This variable affects the print functions prin1 and print, as well as everything that uses them. It does not affect princ. Here is an example using prin1:

(prin1 "a\nb")
     -| "a
     -| b"
     => "a
b"

(let ((print-escape-newlines t))
  (prin1 "a\nb"))
     -| "a\nb"
     => "a
b"

In the second expression, the local binding of print-escape-newlines is in effect during the call to prin1, but not during the printing of the result.

Variable: print-length
The value of this variable is the maximum number of elements of a list that will be printed. If a list being printed has more than this many elements, it is abbreviated with an ellipsis.

If the value is nil (the default), then there is no limit.

(setq print-length 2)
     => 2
(print '(1 2 3 4 5))
     -| (1 2 ...)
     => (1 2 ...)

Variable: print-level
The value of this variable is the maximum depth of nesting of parentheses and brackets when printed. Any list or vector at a depth exceeding this limit is abbreviated with an ellipsis. A value of nil (which is the default) means no limit.

This variable exists in version 19 and later versions.


Go to the first, previous, next, last section, table of contents.