Linux version 2.2.12 (root@tosca) (gcc version egcs-2.91.66 19990314 (egcs-1.1.2 release)) #1 Sun Sep 12 13:24:06 MET DST 1999
Detected 266618815 Hz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 266.24 BogoMIPS
Memory: 95924k/98240k available (700k kernel code, 412k reserved, 1168k data, 36k init)
CPU: Intel Pentium II (Deschutes) stepping 02
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.35a (19990819) Richard Gooch (rgooch@atnf.csiro.au)
PCI: PCI BIOS revision 2.10 entry at 0xf1557
PCI: Using configuration type 1
PCI: Probing PCI hardware
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
Starting kswapd v 1.5 
Detected PS/2 Mouse Port.
Serial driver version 4.27 with no serial options enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
apm: BIOS version 1.2 Flags 0x02 (Driver version 1.9)
loop: registered device at major 7
PIIX4: IDE controller on PCI bus 00 dev 39
PIIX4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xfe60-0xfe67, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xfe68-0xfe6f, BIOS settings: hdc:DMA, hdd:pio
hda: TOSHIBA MK4310MAT, ATA DISK drive
hdc: TOSHIBA CD-ROM XM-1802D, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: TOSHIBA MK4310MAT, 4126MB w/0kB Cache, CHS=526/255/63, UDMA
hdc: ATAPI 24X CD-ROM drive, 128kB Cache
Uniform CDROM driver Revision: 2.55
Floppy drive(s): fd0 is 1.44M
FDC 0 is an 8272A
Partition check:
 hda: hda1 hda2 hda3 hda4 < hda5 hda6 >
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 36k freed
Linux PCMCIA Card Services 3.1.0
  kernel build: 2.2.12 #1 Sun Sep 12 13:24:06 MET DST 1999
  options:  [pci] [cardbus] [apm]
Intel PCIC probe: 
  Toshiba ToPIC97 PCI-to-CardBus at bus 0 slot 2, mem 0x68000000, 2 sockets
    host opts [0]: [slot 0xf0] [ccr 0x10] [cdr 0x86] [rcr 0x02] [no pci irq] [lat 168/176] [bus 20/20]
    host opts [1]: [slot 0xf0] [ccr 0x20] [cdr 0x86] [rcr 0x02] [no pci irq] [lat 168/176] [bus 21/21]
    ISA irqs (default) = 3,4,5,7,9,10,12 polling interval = 1000 ms
cs: IO port probe 0x1000-0x17ff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x220-0x22f 0x330-0x337 0x378-0x37f 0x388-0x38f 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
cs: memory probe 0x0d0000-0x0dffff: clean.
tty01 at 0x02f8 (irq = 3) is a 16550A
ad1848/cs4248 codec driver Copyright (C) by Hannu Savolainen 1993-1996
Found OPL3-SAx (YMF719)
YM3812 and OPL-3 driver Copyright (C) by Hannu Savolainen, Rob Hooft 1993-1996